 |
1080B Mk2 Body
1/4" BSP female thread to
5/8" BSP DIN. Will take our
1082 232Bar adaptor.
1080BHP Mk2 Body
As above but to take our
1083HP 300Bar adaptor.
|
 |
1080P Mk2 Body
As the 1080 Body but
for panel mounting.
Multiple uses also for
protecting DIN
charging hoses and
keeping them tidy
when not in use.
|
 |
1080BM
Mk2 Body
As the 1080 body but with
5/8" DIN end. Has special
seat to accept our 1220
Bullnose fitting. |
 |
1223
Body
2 x 1/4" BSP outlets and Bleed.
1224 Body
3 x 1/4" BSP outlets and Bleed
1226 Body
3 outlets all 1/4" BSP |
1239
DIN Blank
Brass with Bleed Screw.
Chrome plated. |
1230 Manifold Bar
6 outlets all 1/4" BSP with 3 x 8mm blind fixing holes at back.
1 x 1/4" BSP inlet at top to take gauge or our DPM400 transducer. |
|
1227
Body
4 outlets all 1/4" BSP. |
5100 Non Return Valve
Lift pressure 1 Bar Approx.
Supplied cleaned for Oxygen use.
Ends are 1/4" BSP male 60deg cone.
|
5105 Non Return Valve
Lift pressure 1 Bar Approx.
Supplied cleaned for Oxygen use.
Ends are 1/4" BSP female to take
pipe fittings or our 1265 adaptor. |
5110 Pressure Maintaining Valve
Lift pressure is 70 Bar (1000psi)
Greatly extends filter life. Ends
are 1/4" BSP female to take pipe
fittings or our 1265 adaptor. |
