1230 MANIFOLD BAR x 300mm
Brass chrome plated finish. 7 outlets in total all 1/4 BSP
female. There are 2 x 6 mm fixing holes at the back. Use our 1235 Male/Female
swivel adaptor to line up valves.
5100 ONE WAY
OR NON RETURN VALVE
Machined from brass with a very low lift pressure. All seals are Silicone.
This unit comes ready cleaned for mixed gas, oxygen or air use. Threads are 1/4
BSP male with 60° cone seat. Bright chrome plated finish.
6000 BALANCED NEEDLE VALVE
Designed for air line use. All brass construction that has been chrome
plated. The needle seat is of stainless steel. All the 'O' rings are of either
Viton or Silicone to enable this valve to be used with mixed gases. The shaft
has 2 seals to eliminate leaking plus an additional seal under the 63mm soft
grip rubber handwheel to prevent the ingress of dirt. Designed for a working pressure of 300
Bar. Other variants will be introduced later.
6000PM BALANCED NEEDLE VALVE
Details as the 6000 with the added facility to be panel mounted. Supplied
with 2 locking nuts.
